Ottawa Experts

Interlock Pressure Washing Ottawa Ottawa

Interlock pressure washing in Ottawa removes dirt, moss, stains, and buildup that make pavers slippery and discoloured. Professional cleaning restores your interlock appearance while protecting the structural integrity that DIY pressure washing often damages.

  • Free Estimates
  • 5-Year Warranty
  • Ottawa-Wide Service

Get Your Free Estimate

Signs You Need Interlock Pressure Washing Ottawa

Moss and algae growth – Green or black discoloration making pavers slippery
Lichen patches – Crusty growth embedded on paver surface
Oil and grease spots – Vehicle fluid stains on driveways
Efflorescence deposits – White mineral buildup on paver faces
Tire marks and rubber deposits – Dark marks from vehicle traffic
Leaf stains and tannins – Organic staining from fallen leaves
Salt residue buildup – Winter de-icing product accumulation

What Pressure Washing Removes

Professional cleaning eliminates years of accumulated contamination:

Organic Growth

  • Moss and algae (green/black discoloration)
  • Lichen (crusty patches)
  • Mold and mildew
  • Weed roots in joints

Surface Contamination

  • Ground-in dirt and soil
  • Tire marks and rubber deposits
  • Leaf stains and tannins
  • Pollen and environmental fallout

Stains

  • Oil and grease spots
  • Rust marks
  • Efflorescence (white mineral deposits)
  • Paint splatters
  • Food and beverage spills

Buildup

  • Salt residue from winter
  • Hard water deposits
  • Fertilizer staining
  • Construction debris

Safe Pressure Levels for Interlock

Not all pressure washing is equal—too much pressure destroys interlock:

Safe pressure range: 1,500 - 2,500 PSI

What we control

  • **PSI (pressure)** – Enough to clean, not damage
  • **GPM (water flow)** – Adequate rinsing without erosion
  • **Nozzle angle** – 25-40 degree tips, never zero-degree
  • **Distance** – Proper standoff from surface
  • **Technique** – Consistent sweeping motion

Paver-specific considerations

  • Concrete pavers: More pressure tolerant
  • Clay pavers: Require gentler approach
  • Natural stone: Varies by type
  • Aged pavers: More fragile than new

Why DIY Pressure Washing Can Cause Damage

Rental pressure washers in untrained hands cause serious problems:

Joint Damage

  • High pressure blasts polymeric sand from joints
  • Creates channels for water infiltration
  • Requires complete re-sanding after cleaning
  • Cost of re-sanding often exceeds professional cleaning

Surface Damage

  • Etching and pitting of paver faces
  • Stripping of surface sealers
  • Uneven cleaning patterns (striping)
  • Edge chipping from direct spray

Structural Issues

  • Base erosion from concentrated water
  • Destabilizing edge restraints
  • Creating new low spots
  • Accelerating existing problems

Common DIY mistakes

  • Using zero-degree nozzles
  • Holding wand too close
  • Inconsistent technique
  • Ignoring joint sand loss
  • Pressure washing wet surfaces

When to Re-Sand After Pressure Washing

Pressure washing affects joint sand—here's how we handle it:

Minor sand loss (surface level)

  • Top up with matching polymeric sand
  • Included in our cleaning service
  • No additional charge

Moderate sand loss (1/3 joint depth)

  • Partial re-sanding recommended
  • Additional service quoted separately
  • Best done while surface is clean

Severe sand loss (1/2+ joint depth)

  • Full re-sanding required
  • Often combined with sealing
  • Bundle pricing available

Our Interlock Pressure Washing Ottawa Process

We follow a proven process:

1

Pre-Inspection

Assess paver type, joint condition, stain types, and any structural concerns before starting.

2

Pre-Treatment

Apply appropriate cleaning solutions: alkaline cleaners for organic growth, degreasers for oil stains, acid solutions for efflorescence. Allow proper dwell time.

3

Surface Cleaning

Using commercial equipment with controlled pressure: surface cleaner attachments for even coverage, consistent overlapping passes, special attention to stained areas, edge and corner detailing.

4

Rinse and Neutralize

Thorough rinsing removes all cleaning agents and loosened debris. Neutralizing where chemicals were used.

5

Joint Assessment

Evaluate joint condition post-cleaning. Minor sand loss is topped up; significant loss requires re-sanding.

6

Final Inspection

Verify complete cleaning and address any remaining spots.

Interlock Pressure Washing Ottawa Cost in Ottawa

Typical Price Range
$0.50 - $1.50 per square foot

Project Examples:

  • Driveway (400-600 sq ft): $350 - $600. Patio (200-400 sq ft): $250 - $450. Walkway (50-150 sq ft): $250 - $350. Minimum service charge: $250 - $350.

Get Your Free Estimate

Contact us today for a free, no-obligation estimate for your interlock pressure washing ottawa project.

Call Now Get Free Quote